NewAge Industries Plastic Tubing and Hose Fluid Transfer Specialists


CLEARFLO® - Flexible PVC Tubing   Back to Tubing & Hose Page
Clear PVC Tubing

Made in USA

   Clear PVC Tubing
 
  • Made from non-toxic ingredients conforming to FDA standards^
  • PVC compound meets USP Class VI requirements^
  • Listed by the National Sanitation Foundation (NSF-51) for food equipment materials^
  • BPA free
  • Glass-like clarity^ with mirror-smooth surface provides outstanding flow characteristics
  • Does not impart a taste or odor^
  • Lightweight yet tough and abrasion resistant
  • As flexible as rubber
  • Handles a wide variety of chemicals, gases, and liquids
  • Raw material meets UL94 HB burn rating
  • RoHS compliant
  • Special Fuel & Oil grade available

^Clear only

nsf logo

APPLICATIONS

Air & Gas Lines • Chemical Lines • Pharmaceutical • Food & Beverage • Instrumentation • Laboratory & Research • Material Handling • Medical • Protective Jacketing • Pump Feed & Discharge • Refrigeration • Water & Fluid Lines

Physical Properties**
 

Fuel&Oil

Clear

Hardness, Shore A 5 62 68
Tensile Strength, psi 1980 1900
Elongation at Break, % 730 400
Brittle Temperature -20°F -41F
Max. Operating Temperature 175F 175F
Max. Operating Temperature for NSF N/A 120°F

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.


Recommended Fittings & Clamps
  Notes

CLEARFLO clear plastic tubing is generally unaffected by most oxidizing and reducing agents. Diluted acids and alkalies have little effect, though if highly concentrated tend to make the tubing less pliable. If chemical resistance is of major concern, in-plant tests are suggested.

In clean applications, CLEARFLO's smooth surface prevents lodging of bacteria and sediment buildup. It is easily drained and flushed clean with most available cleaning and sanitizing agents. CLEARFLO may be autoclaved at 20 lbs. steam pressure for 15 minutes.

Transparent yellow, Fuel & Oil Grade CLEARFLO, was created to extend the working life of PVC tubing in fuel & oil applications. Gasoline and oils harden standard PVC over periods of intermittent use, but CLEARFLO FUEL & OIL is specially formulated to prevent hardening.

Other durometers, repetitive cutting, bonding, heat-formed shapes, and custom fabrication are all available -- call for details. Overbraiding for higher pressure capability (also see NYLOBRADE® ) is also available. Samples of stock material are available upon request.

Also available in an antimicrobial formulation as Clearflo Ag-47.

TOP OF PAGE


request for quoteCLEARFLO

Product Number ID  OD  Wall  Available Lengths  Working PSI (at 70F)  Weight (lbs/100 ft) 
  1100071 .063 (1/16)  .125 (1/8)  .031 (1/32)  500  33  0.51 
  1100225 .094 (3/32)  .156 (5/32)  .031 (1/32)  500  42  0.68 
  1100379 .125 (1/8)  .188 (3/16)  .031 (1/32)  500  44  0.85 
  1100456 .125 (1/8)  .250 (1/4)  .063 (1/16)  100, 500  68  2.1 
  1100841 .188 (3/16)  .250 (1/4)  .031 (1/32)  100  33  1.2 
  1100918 .188 (3/16)  .313 (5/16)  .063 (1/16)  100, 500  55  2.7 
  1100995 .188 (3/16)  .375 (3/8)  .094 (3/32)  100  70  4.6 
  1101149 .250 (1/4)  .375 (3/8)  .063 (1/16)  50, 100, 500  55  3.4 
  1101226 .250 (1/4)  .438 (7/16)  .094 (3/32)  100  60  5.7 
  1101303 .250 (1/4)  .500 (1/2)  .125 (1/8)  100  70  8.3 
  1101380 .313 (5/16)  .438 (7/16)  .063 (1/16)  100, 500  50  4.2 
  1101457 .313 (5/16)  .500 (1/2)  .094 (3/32)  100  60  6.8 
  1101534 .313 (5/16)  .563 (9/16)  .125 (1/8)  100  70  9.7 
  1101611 .375 (3/8)  .500 (1/2)  .063 (1/16)  100, 500  40  4.8 
  1101688 .375 (3/8)  .563 (9/16)  .094 (3/32)  100  50  7.8 
  1101765 .375 (3/8)  .625 (5/8)  .125 (1/8)  100  65  11.1 
  1101842 .375 (3/8)  .750 (3/4)  .188 (3/16)  100  66  18.7 
  1102150 .438 (7/16)  .688 (11/16)  .125 (1/8)  100  50  12.5 
  1102227 .500 (1/2)  .625 (5/8)  .063 (1/16)  100, 500  30  6.2 
  1102304 .500 (1/2)  .688 (11/16)  .094 (3/32)  100  40  9.9 
  1102381 .500 (1/2)  .750 (3/4)  .125 (1/8)  50, 100  45  13.9 
  1102689 .563 (9/16)  .750 (3/4)  .094 (3/32)  100  40  11 
  1102920 .625 (5/8)  .750 (3/4)  .063 (1/16)  100  20  7.6 
  1102997 .625 (5/8)  .813 (13/16)  .094 (3/32)  100  35  12 
  1103074 .625 (5/8)  .875 (7/8)  .125 (1/8)  50, 100  40  16.6 
  1103151 .625 (5/8)  .938 (15/16)  .156 (5/32)  100  50  21.7 
  1103536 .750 (3/4)  .875 (7/8)  .063 (1/16)  100  19 
  1103613 .750 (3/4)  1.000  .125 (1/8)  50, 100  35  19.4 
  1103690 .750 (3/4)  1.063 (1-1/16)  .156 (5/32)  100  40  25.1 
  1103767 .750 (3/4)  1.125 (1-1/8)  .188 (3/16)  100  44  31.2 
  1103844 .750 (3/4)  1.250 (1-1/4)  .250 (1/4)  100  44  44.3 
  1103921 .875 (7/8)  1.125 (1-1/8)  .125 (1/8)  100  30  22.1 
  1104152 1.000  1.250 (1-1/4)  .125 (1/8)  50, 100  28  25 
  1104306 1.000  1.375 (1-3/8)  .188 (3/16)  100  45  39.4 
  1104383 1.000  1.500 (1-1/2)  .250 (1/4)  100  50  55 
  1104691 1.250 (1-1/4)  1.500 (1-1/2)  .125 (1/8)  100  22  30.5 
  1104768 1.250 (1-1/4)  1.625 (1-5/8)  .188 (3/16)  50, 100  31  47.8 
  1104845 1.250 (1-1/4)  1.750 (1-3/4)  .250 (1/4)  50  45  66.5 
  1104999 1.500 (1-1/2)  1.750 (1-3/4)  .125 (1/8)  50, 100  19  36 
  1105076 1.500 (1-1/2)  1.875 (1-7/8)  .188 (3/16)  50, 100  26  56.1 
  1105153 1.500 (1-1/2)  2.000  .250 (1/4)  50  40  77.5 
  1105307 1.750 (1-3/4)  2.000  .125 (1/8)  50  16  41.5 
  1105384 1.750 (1-3/4)  2.250 (2-1/4)  .250 (1/4)  50  29  80 
  1105461 2.000  2.250 (2-1/4)  .125 (1/8)  50  14  47.1 
  1105615 2.000  2.500 (2-1/2)  .250 (1/4)  50  35  99.7 
  1105769 2.250 (2-1/4)  2.750 (2-3/4)  .250 (1/4)  50  24  111 
  1105846 2.500 (2-1/2)  3.000  .250 (1/4)  50  22  122 
  1105923 3.000  3.500 (3-1/2)  .250 (1/4)  50  19  144 
  1106077 4.000  4.750 (4-3/4)  .375 (3/8)  50  21  300 

Add length suffix to part number when ordering.
Example: 100 ft. of 1" I.D. x 1-1/4" O.D. tubing is part number 110 4152-100.
Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
Cut coils are available from coils of 100 ft. or less; charges apply -- call for details.
Coils over 100 ft. are sold by standard coil length only.
ID is the critical dimension for fittings application.

clearflo litDownload a printable PDF version of our Clearflo PVC tubing literature.

Clearflo_PVC_Tubing.pdf (204kb)

Requires Adobe® Reader® to view.

TOP OF PAGE


CLEARFLO - Fuel & Oil Grade^^ Tubing - Transparent Yellow

Fuel and Oil Grade PVC Tubing Notes

Special, transparent yellow, Fuel & Oil Grade CLEARFLO, was created to extend the working life of PVC tubing in fuel & oil applications.

request for quote

Product Number Note  ID  OD  Wall  Available Lengths  Working PSI (at 70F)  Weight (lbs/100 ft) 
  1110032   .125 (1/8)  .250 (1/4)  .063 (1/16)  50  68  2.1 
  1110067 [B]  .188 (3/16)  .313 (5/16)  .063 (1/16)  100  55  2.8 
  1110102   .250 (1/4)  .375 (3/8)  .063 (1/16)  50, 100  55  3.5 
  1110172   .500 (1/2)  .750 (3/4)  .125 (1/8)  50  45  12.8 

^^Specially formulated to remain flexible when used with fuels & oils. NOT NSF LISTED; for industrial applications only.
[B] Limited stock item; lead times and minimums may apply --call for details.
Add length suffix to part number when ordering. Example: 50 ft. of 1/8" I.D. x 1/4" O.D. tubing is part number 111 0032-50. Sold by standard coil length only.
Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
ID is the critical dimension for fittings application.

clearflo litDownload a printable PDF version of our Clearflo PVC tubing literature.

Clearflo_PVC_Tubing.pdf (204kb)

Requires Adobe® Reader® to view.

TOP OF PAGE

BACK TO TUBING & HOSE PAGE

| Home | Products | About Us | Reference Tools | Contact Us | Request for Quote |
| News | Tradeshow Schedule | Employment Opportunities | Community Service | Why NewAge? |


Legal Notices & Trademarks | Privacy Policy | Terms & Conditions of Sale 2000 - 2017 NewAge Industries, Inc.

   facebook   linkedin   twitter   google plus

We are your "Fluid Transfer Specialists®"
Contact Us For Experienced Technical Support:
Phone: 800-506-3924 or 215-526-2300
Fax: 800-837-1856 or 215-526-2190
E-mail:
esales@newageindustries.com

NewAge® Industries, Inc., 145 James Way, Southampton, PA 18966-3817