 |
|
|
|
Clear PVC Tubing |
| |
- Made from non-toxic ingredients conforming to FDA and 3A standards^
- PVC compound meets USP Class VI requirements
- Listed by the National Sanitation Foundation (NSF 51) for food equipment materials^
- Glass-like clarity^ with mirror-smooth surface provides outstanding flow characteristics
- Does not impart a taste or odor^
- Lightweight yet tough and abrasion resistant
- As flexible as rubber
- Handles a wide variety of chemicals, gases, and
liquids
- Material meets UL94 HB burn rating
- Special Fuel & Oil grade available
|
APPLICATIONS
Air & Gas Lines • Chemical Lines •
Pharmaceutical • Food & Beverage • Instrumentation
• Laboratory & Research • Material Handling •
Medical • Protective Jacketing • Pump Feed &
Discharge • Refrigeration • Water & Fluid Lines
Physical Properties**
| |
Fuel&Oil
|
Clear
|
| Hardness,
Shore A ±5 |
62 |
68 |
| Tensile
Strength, psi |
1980 |
1900 |
| Elongation
at Break, % |
730 |
400 |
| Brittle
Temperature |
-20°F |
-41°F |
| Max.
Operating Temperature |
175°F |
175°F |
**Values listed are typical and are
meant only as a guide to aid in design. Field testing
should be performed to find the actual values for the
application.
Recommended Fittings & Clamps
|
|
Notes
CLEARFLO clear plastic tubing is
generally unaffected by most oxidizing and reducing
agents. Diluted acids and alkalies have little effect,
though if highly concentrated tend to make the tubing
less pliable. If chemical resistance is of major concern,
in-plant tests are suggested.
In clean applications, CLEARFLO's smooth surface prevents lodging of bacteria and sediment buildup. It is easily drained and flushed clean with most available cleaning and sanitizing agents. CLEARFLO may be autoclaved at 20 lbs. steam pressure for 15 minutes.
Transparent yellow, Fuel & Oil Grade CLEARFLO, was created to extend the working life of PVC tubing in fuel & oil applications. Gasoline and oils harden standard PVC over periods of intermittent use, but CLEARFLO FUEL & OIL is specially formulated to prevent hardening.
Other durometers, repetitive cutting, bonding, heat-formed shapes, and custom fabrication are all available -- call for details. Overbraiding for higher pressure capability (also see NYLOBRADE®
) is also available. Samples of stock material
are available upon request.
|
TOP OF PAGE
 CLEARFLO
| Product Number |
ID |
OD |
Wall |
Available Lengths |
Working PSI (at 70°F) |
Burst PSI (at 70°F) |
Weight (lbs/100 ft) |
|
1100071 |
.063 (1/16) |
.125 (1/8) |
.031 (1/32) |
500 |
33 |
132 |
0.51 |
|
1100225 |
.094 (3/32) |
.156 (5/32) |
.031 (1/32) |
500 |
42 |
168 |
0.68 |
|
1100379 |
.125 (1/8) |
.188 (3/16) |
.031 (1/32) |
500 |
44 |
176 |
0.85 |
|
1100456 |
.125 (1/8) |
.250 (1/4) |
.063 (1/16) |
100, 500 |
68 |
272 |
2.1 |
|
1100841 |
.188 (3/16) |
.250 (1/4) |
.031 (1/32) |
100 |
33 |
132 |
1.2 |
|
1100918 |
.188 (3/16) |
.313 (5/16) |
.063 (1/16) |
100, 500 |
55 |
220 |
2.7 |
|
1100995 |
.188 (3/16) |
.375 (3/8) |
.094 (3/32) |
100 |
70 |
280 |
4.6 |
|
1101149 |
.250 (1/4) |
.375 (3/8) |
.063 (1/16) |
50, 100, 500 |
55 |
220 |
3.4 |
|
1101226 |
.250 (1/4) |
.438 (7/16) |
.094 (3/32) |
100 |
60 |
240 |
5.7 |
|
1101303 |
.250 (1/4) |
.500 (1/2) |
.125 (1/8) |
100 |
70 |
280 |
8.3 |
|
1101380 |
.313 (5/16) |
.438 (7/16) |
.063 (1/16) |
100, 500 |
50 |
200 |
4.2 |
|
1101457 |
.313 (5/16) |
.500 (1/2) |
.094 (3/32) |
100 |
60 |
240 |
6.8 |
|
1101534 |
.313 (5/16) |
.563 (9/16) |
.125 (1/8) |
100 |
70 |
280 |
9.7 |
|
1101611 |
.375 (3/8) |
.500 (1/2) |
.063 (1/16) |
100, 500 |
40 |
160 |
4.8 |
|
1101688 |
.375 (3/8) |
.563 (9/16) |
.094 (3/32) |
100 |
50 |
200 |
7.8 |
|
1101765 |
.375 (3/8) |
.625 (5/8) |
.125 (1/8) |
100 |
65 |
260 |
11.1 |
|
1101842 |
.375 (3/8) |
.750 (3/4) |
.188 (3/16) |
100 |
66 |
264 |
18.7 |
|
1102150 |
.438 (7/16) |
.688 (11/16) |
.125 (1/8) |
100 |
50 |
200 |
12.5 |
|
1102227 |
.500 (1/2) |
.625 (5/8) |
.063 (1/16) |
100, 500 |
30 |
120 |
6.2 |
|
1102304 |
.500 (1/2) |
.688 (11/16) |
.094 (3/32) |
100 |
40 |
160 |
9.9 |
|
1102381 |
.500 (1/2) |
.750 (3/4) |
.125 (1/8) |
50, 100 |
45 |
180 |
13.9 |
|
1102689 |
.563 (9/16) |
.750 (3/4) |
.094 (3/32) |
100 |
40 |
160 |
11 |
|
1102920 |
.625 (5/8) |
.750 (3/4) |
.063 (1/16) |
100 |
20 |
80 |
7.6 |
|
1102997 |
.625 (5/8) |
.813 (13/16) |
.094 (3/32) |
100 |
35 |
140 |
12 |
|
1103074 |
.625 (5/8) |
.875 (7/8) |
.125 (1/8) |
50, 100 |
40 |
160 |
16.6 |
|
1103151 |
.625 (5/8) |
.938 (15/16) |
.156 (5/32) |
100 |
50 |
200 |
21.7 |
|
1103536 |
.750 (3/4) |
.875 (7/8) |
.063 (1/16) |
100 |
19 |
76 |
9 |
|
1103613 |
.750 (3/4) |
1.000 |
.125 (1/8) |
50, 100 |
35 |
140 |
19.4 |
|
1103690 |
.750 (3/4) |
1.063 (1-1/16) |
.156 (5/32) |
100 |
40 |
160 |
25.1 |
|
1103767 |
.750 (3/4) |
1.125 (1-1/8) |
.188 (3/16) |
100 |
44 |
176 |
31.2 |
|
1103844 |
.750 (3/4) |
1.250 (1-1/4) |
.250 (1/4) |
100 |
44 |
176 |
44.3 |
|
1103921 |
.875 (7/8) |
1.125 (1-1/8) |
.125 (1/8) |
100 |
30 |
120 |
22.1 |
|
1104152 |
1.000 |
1.250 (1-1/4) |
.125 (1/8) |
50, 100 |
28 |
112 |
25 |
|
1104306 |
1.000 |
1.375 (1-3/8) |
.188 (3/16) |
100 |
45 |
180 |
39.4 |
|
1104383 |
1.000 |
1.500 (1-1/2) |
.250 (1/4) |
100 |
50 |
200 |
55 |
|
1104614 |
1.250 (1-1/4) |
1.438 (1-7/16) |
.094 (3/32) |
50 |
30 |
120 |
22.5 |
|
1104691 |
1.250 (1-1/4) |
1.500 (1-1/2) |
.125 (1/8) |
100 |
22 |
88 |
30.5 |
|
1104768 |
1.250 (1-1/4) |
1.625 (1-5/8) |
.188 (3/16) |
50, 100 |
31 |
124 |
47.8 |
|
1104845 |
1.250 (1-1/4) |
1.750 (1-3/4) |
.250 (1/4) |
50 |
45 |
180 |
66.5 |
|
1104999 |
1.500 (1-1/2) |
1.750 (1-3/4) |
.125 (1/8) |
50, 100 |
19 |
76 |
36 |
|
1105076 |
1.500 (1-1/2) |
1.875 (1-7/8) |
.188 (3/16) |
50, 100 |
26 |
104 |
56.1 |
|
1105153 |
1.500 (1-1/2) |
2.000 |
.250 (1/4) |
50 |
40 |
160 |
77.5 |
|
1105307 |
1.750 (1-3/4) |
2.000 |
.125 (1/8) |
50 |
16 |
64 |
41.5 |
|
1105384 |
1.750 (1-3/4) |
2.250 (2-1/4) |
.250 (1/4) |
50 |
29 |
116 |
80 |
|
1105461 |
2.000 |
2.250 (2-1/4) |
.125 (1/8) |
50 |
14 |
56 |
47.1 |
|
1105615 |
2.000 |
2.500 (2-1/2) |
.250 (1/4) |
50 |
35 |
140 |
99.7 |
|
1105769 |
2.250 (2-1/4) |
2.750 (2-3/4) |
.250 (1/4) |
50 |
24 |
96 |
111 |
|
1105846 |
2.500 (2-1/2) |
3.000 |
.250 (1/4) |
50 |
22 |
88 |
122 |
|
1105923 |
3.000 |
3.500 (3-1/2) |
.250 (1/4) |
50 |
19 |
76 |
144 |
|
1106077 |
4.000 |
4.750 (4-3/4) |
.375 (3/8) |
50 |
21 |
84 |
300 |
|
Add length suffix to part number when ordering.
Example: 100 ft. of 1" I.D. x 1-1/4" O.D. tubing is
part number 110 4152-100.
Cut coils are available from coils of 100 ft. or less; charges
apply -- call for details.
Coils over 100 ft. are sold by standard coil length only.
ID is the critical dimension for fittings
application.
|
|
TOP OF PAGE
CLEARFLO - Fuel & Oil Grade^^ Tubing - Transparent Yellow
 |
|
Notes
Special, transparent yellow, Fuel & Oil Grade CLEARFLO, was created to extend the working life of PVC tubing in fuel & oil applications.
|
| Product Number |
ID |
OD |
Wall |
Available Lengths |
Working PSI (at 70°F) |
Burst PSI (at 70°F) |
Weight (lbs/100 ft) |
|
1110032 |
.125 (1/8) |
.250 (1/4) |
.063 (1/16) |
50 |
68 |
204 |
2.1 |
|
1110067 |
.188 (3/16) |
.313 (5/16) |
.063 (1/16) |
50, 100 |
55 |
165 |
2.8 |
|
1110102 |
.250 (1/4) |
.375 (3/8) |
.063 (1/16) |
50, 100 |
55 |
165 |
3.5 |
|
1110137 |
.375 (3/8) |
.500 (1/2) |
.063 (1/16) |
50 |
40 |
120 |
4.9 |
|
1110172 |
.500 (1/2) |
.750 (3/4) |
.125 (1/8) |
50 |
45 |
135 |
12.8 |
|
^^Specially formulated to remain flexible when used with fuels & oils. NOT NSF LISTED. For industrial applications only.
Standard coil length is 100 ft. Add length suffix to part number when ordering.
Example: 100 ft. of 3/8" I.D. x 1/2" O.D. is part number 111 0137-100.
ID is the critical dimension for fittings
application.
|
 Download a printable PDF version of our Clearflo PVC tubing literature.
|
|
|
TOP OF PAGE
BACK TO TUBING & HOSE PAGE
|
