NewAge Industries Plastic Tubing and Hose Fluid Transfer Specialists


FLUOROPOLYMER TUBING   Back to Tubing & Hose Page
PFA, FEP, PTFE tubing

Made in USA

   PTFE, FEP & PFA Fluoropolymer Tubing
 
  • Chemically inert; low permeability
  • Manufactured from FDA compliant materials for use with food contact surfaces
  • Lowest coefficient of friction of any solid material
  • Excellent electrical and weatherability properties; non-flammable
  • Made without plasticizer which can leach into critical streams
  • Ultra-high-purity grades available for the semiconductor industry
APPLICATIONS

Adhesives • Beverage • Chemical Plants • Corrosives • Cryogenics • Deionized Water Transfer • Food Transfer • Lighting Covers • Laboratory • Medical • Paint Spray • Pure Water Systems • Sight Glass • Solvents • Water Sampling • Wire Insulation

Physical Properties**
  PTFE FEP PFA
Hardness, Shore D 50-65 55-60 55-60
Tensile Strength, psi 2000-3000 4000 4200
Elongation at Break, % 200-450 250-330 400
Brittle Temperature <-450F <-450F <-450F
Max. Continuous Op. Temp. 500F 400F 500F

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the

 

Notes

Almost totally inert, Fluoropolymer can be used with virtually all industrial solvents, chemicals, and corrosive materials, even at elevated temperatures. It does, however, react with fluorine, molten sodium hydroxide, and molten alkali metals.

Fluoropolymer Tubing can be steam or chemically sterilized in-line with any industrial cleaner, solvent, or sterilizing method.

Fluoropolymer's non-stick property allows transport of viscous, sticky materials without line clogging. It also offers outstanding aging resistance.

PTFE's translucent white color will vary naturally from lot to lot, however, the quality and physical properties do not change. FEP & PFA are clearer and can be heat sealed and heat bonded.

Permanent color striping, etching, and longer-than-listed lengths are available through minimum order. Polyethylene- jacketed, thin-wall fluoropolymer tubing, for low-cost purity, is also available through minimum order — call for details.

back to top TOP OF PAGE


Request for QuotePTFE TUBING

Product Number Note  ID  OD  Wall  Material  Working PSI (at 72F)  Burst PSI (at 72F)  Available Lengths  Colors 
  3000074 [B]  .031 (1/32)  .063 (1/16)  .016  Fluoropolymer PTFE  323  1290  100  White 
  3000151   .031 (1/32)  .094 (3/32)  .030  Fluoropolymer PTFE  390  1950  100  White 
  3000228   .063 (1/16)  .125 (1/8)  .030  Fluoropolymer PTFE  290  1450  50, 100  White 
  3000382   .094 (3/32)  .156 (5/32)  .030  Fluoropolymer PTFE  220  1100  50, 100  White 
  3000459   .125 (1/8)  .188 (3/16)  .030  Fluoropolymer PTFE  180  900  50, 100  White 
  3000536   .125 (1/8)  .250 (1/4)  .063 (1/16)  Fluoropolymer PTFE  310  1550  50, 100  White 
  3000690   .188 (3/16)  .250 (1/4)  .030  Fluoropolymer PTFE  130  650  50, 100  White 
  3000767   .188 (3/16)  .313 (5/16)  .063 (1/16)  Fluoropolymer PTFE  222  1110  50, 100  White 
  3000844   .250 (1/4)  .313 (5/16)  .030  Fluoropolymer PTFE  100  500  50, 100  White 
  3000921   .250 (1/4)  .375 (3/8)  .063 (1/16)  Fluoropolymer PTFE  207  1035  25, 50, 100  White 
  3000998   .313 (5/16)  .375 (3/8)  .030  Fluoropolymer PTFE  80  400  25, 50, 100  White 
  3001152   .375 (3/8)  .438 (7/16)  .030  Fluoropolymer PTFE  70  350  25, 50, 100  White 
  3001229   .375 (3/8)  .500 (1/2)  .063 (1/16)  Fluoropolymer PTFE  155  775  25, 50, 100  White 
  3001306   .438 (7/16)  .500 (1/2)  .030  Fluoropolymer PTFE  60  300  25, 50, 100  White 
  3001460   .500 (1/2)  .563 (9/16)  .030  Fluoropolymer PTFE  55  275  25, 50, 100  White 
  3001537   .500 (1/2)  .625 (5/8)  .063 (1/16)  Fluoropolymer PTFE  100  500  25, 50, 100  White 
  3001614   .563 (9/16)  .625 (5/8)  .030  Fluoropolymer PTFE  50  250  25, 50, 100  White 
  3001845   .625 (5/8)  .750 (3/4)  .063 (1/16)  Fluoropolymer PTFE  80  400  25, 50, 100  White 
  3001922   .688 (11/16)  .750 (3/4)  .032  Fluoropolymer PTFE  40  200  25  White 
  3010175   2mm  4mm  1mm  Fluoropolymer PTFE      50, 100  White 
  3010350   4mm  6mm  1mm  Fluoropolymer PTFE      50, 100  White 
  3010525   6mm  8mm  1mm  Fluoropolymer PTFE      50, 100  White 
  3010700   8mm  10mm  1mm  Fluoropolymer PTFE      25, 50, 100  White 
  3010875 [B]  10mm  12mm  1mm  Fluoropolymer PTFE      25, 50, 100  White 
  3011050 [B]  12mm  14mm  1mm  Fluoropolymer PTFE      25, 50, 100  White 

[B] Limited stock item; lead times and minimums may apply --call for details.
Burst pressures are calculated using a 5:1 safety factor.
Add length suffix to part number when ordering. Example: 50 ft. of 1/16" I.D. x 1/8 O.D. PTFE is part number 300 0228-50.
NOTE: Orders for 50ft. lengths of PTFE tubing may be filled with a maximum of two lengths of product totaling 50ft.. Orders for 100ft. lengths of PTFE tubing may be filled with a maximum of three lengths of product totaling 100ft.

OD is the critical dimension for fittings application.
Dowload a printable PDF version of our Fluoropolymer Tubing, Hose & Fitting Catalog.

Fluoropolymer_Catalog.pdf (1.4MB)

Requires Adobe® Reader® to view.

back to top TOP OF PAGE


Request for QuoteFEP TUBING

Product Number Note  ID  OD  Wall  Material  Working PSI (at 72F)  Burst PSI (at 72F)  Available Lengths  Colors 
  3100048 [B]  .031 (1/32)  .094 (3/32)  .030  Fluoropolymer FEP  630  3150  100  Clear 
  3100090   .063 (1/16)  .125 (1/8)  .030  Fluoropolymer FEP  445  2225  50, 100  Clear 
  3100167   .063 (1/16)  .188 (3/16)  .063 (1/16)  Fluoropolymer FEP  612  3060  50, 100  Clear 
  3100244   .094 (3/32)  .156 (5/32)  .030  Fluoropolymer FEP  360  1800  50, 100  Clear 
  3100321   .125 (1/8)  .188 (3/16)  .030  Fluoropolymer FEP  296  1480  50, 100  Clear 
  3100398   .125 (1/8)  .250 (1/4)  .063 (1/16)  Fluoropolymer FEP  460  2300  50, 100  Clear 
  3100552   .188 (3/16)  .250 (1/4)  .030  Fluoropolymer FEP  210  1050  50, 100  Clear 
  3100629   .188 (3/16)  .313 (5/16)  .063 (1/16)  Fluoropolymer FEP  360  1800  50, 100  Clear 
  3100706   .250 (1/4)  .313 (5/16)  .030  Fluoropolymer FEP  160  800  50, 100  Clear 
  3100783   .250 (1/4)  .375 (3/8)  .063 (1/16)  Fluoropolymer FEP  290  1450  25, 50, 100  Clear 
  3100860   .313 (5/16)  .375 (3/8)  .030  Fluoropolymer FEP  130  650  25, 50, 100  Clear 
  3101014   .375 (3/8)  .438 (7/16)  .030  Fluoropolymer FEP  110  550  50, 100  Clear 
  3101091   .375 (3/8)  .500 (1/2)  .063 (1/16)  Fluoropolymer FEP  210  1050  25, 50, 100  Clear 
  3101168   .438 (7/16)  .500 (1/2)  .030  Fluoropolymer FEP  90  450  25, 50, 100  Clear 
  3101322   .500 (1/2)  .563 (9/16)  .030  Fluoropolymer FEP  72  360  25, 50, 100  Clear 
  3101399   .500 (1/2)  .625 (5/8)  .063 (1/16)  Fluoropolymer FEP  145  725  25, 50, 100  Clear 
  3101707   .625 (5/8)  .750 (3/4)  .063 (1/16)  Fluoropolymer FEP  130  650  25, 50, 100  Clear 
  3101784   .688 (11/16)  .750 (3/4)  .032  Fluoropolymer FEP  74  370  25  Clear 
  3101938   .750 (3/4)  .830  .040  Fluoropolymer FEP  65  325  10 Straight  Clear 
  3102015   .750 (3/4)  .875 (7/8)  .063 (1/16)  Fluoropolymer FEP  132  660  5, 10 Straight  Clear 
  3102169   .875 (7/8)  1.000  .063 (1/16)  Fluoropolymer FEP  90  450  5, 10 Straight  Clear 
  3102246   1.000  1.100  .050  Fluoropolymer FEP  52  260  5, 10 Straight  Clear 
  3102323   1.000  1.125 (1 1/8)  .063 (1/16)  Fluoropolymer FEP  75  375  5, 10 Straight  Clear 
  3102477   1.250 (1-1/4)  1.375 (1-3/8)  .063 (1/16)  Fluoropolymer FEP  60  300  5, 10 Straight  Clear 
  3102631 [B]  1.500 (1-1/2)  1.625 (1-5/8)  .063 (1/16)  Fluoropolymer FEP      Clear 
  3110177   2mm  4mm  1mm  Fluoropolymer FEP      50, 100  Clear 
  3110352   4mm  6mm  1mm  Fluoropolymer FEP      50, 100  Clear 
  3110527   6mm  8mm  1mm  Fluoropolymer FEP      50, 100  Clear 
  3110702   8mm  10mm  1mm  Fluoropolymer FEP      25, 50, 100  Clear 
  3110877   10mm  12mm  1mm  Fluoropolymer FEP      25, 50, 100  Clear 
  3111052   12mm  14mm  1mm  Fluoropolymer FEP      50  Clear 

[B] Limited stock item; lead times and minimums may apply --call for details.
Burst pressures are calculated using a 5:1 safety factor.
Add length suffix to part number when ordering. Example: 50 ft. of 1/16" I.D. x 1/8 O.D. FEP is part number 310 0090-50.
NOTE: All FEP is supplied in single-section packages.

OD is the critical dimension for fittings application.
fluoropolymer catalog
Dowload a printable PDF version of our Fluoropolymer Tubing, Hose & Fitting Catalog.

Fluoropolymer_Catalog.pdf (1.4MB)

Requires Adobe® Reader® to view.
Get Adobe Reader

back to top TOP OF PAGE


Request for QuotePFA TUBING

Product Number Note  ID  OD  Wall  Material  Working PSI (at 72F)  Burst PSI (at 72F)  Available Lengths  Colors 
  3200176   .063 (1/16)  .125 (1/8)  .030  Fluoropolymer PFA  449  2245  50, 100  Clear 
  3200330   .094 (3/32)  .156 (5/32)  .030  Fluoropolymer PFA  360  1800  50, 100  Clear 
  3200407   .125 (1/8)  .188 (3/16)  .030  Fluoropolymer PFA  299  1495  50, 100  Clear 
  3200484   .125 (1/8)  .250 (1/4)  .063 (1/16)  Fluoropolymer PFA  464  2320  50, 100  Clear 
  3200561   .188 (3/16)  .250 (1/4)  .030  Fluoropolymer PFA  225  1125  50, 100  Clear 
  3200715   .250 (1/4)  .313 (5/16)  .030  Fluoropolymer PFA  179  895  50, 100  Clear 
  3200792   .250 (1/4)  .375 (3/8)  .063 (1/16)  Fluoropolymer PFA  310  1550  25, 50, 100  Clear 
  3200869   .313 (5/16)  .375 (3/8)  .030  Fluoropolymer PFA  140  700  50, 100  Clear 
  3201100   .375 (3/8)  .500 (1/2)  .063 (1/16)  Fluoropolymer PFA  230  1150  25, 50, 100  Clear 
  3201331   .500 (1/2)  .563 (9/16)  .030  Fluoropolymer PFA  88  440  25, 100  Clear 
  3201408   .500 (1/2)  .625 (5/8)  .063 (1/16)  Fluoropolymer PFA  186  930  25, 50, 100  Clear 
  3201716   .625 (5/8)  .750 (3/4)  .063 (1/16)  Fluoropolymer PFA  140  700  25, 50, 100  Clear 
  3210354   4mm  6mm  1mm  Fluoropolymer PFA      50, 100  Clear 
  3210529   6mm  8mm  1mm  Fluoropolymer PFA      50, 100  Clear 
  3210704   8mm  10mm  1mm  Fluoropolymer PFA      25, 50, 100  Clear 
  3210879 [B]  10mm  12mm  1mm  Fluoropolymer PFA      50, 100  Clear 

[B] Limited stock item; lead times and minimums may apply --call for details.
Burst pressures are calculated using a 5:1 safety factor.
Add length suffix to part number when ordering. Example: 50 ft. of 1/16" I.D. x 1/8 O.D. PFA is part number 320 0176-50.
NOTE: All PFA is supplied in single-section packages.

OD is the critical dimension for fittings application.
fluoropolymer catalog
Dowload a printable PDF version of our Fluoropolymer Tubing, Hose & Fitting Catalog.

Fluoropolymer_Catalog.pdf (1.4MB)

Requires Adobe® Reader® to view.
Get Adobe Reader

back to top TOP OF PAGE

 

BACK TO TUBING & HOSE PAGE

| Home | Products | About Us | Reference Tools | Contact Us | Request for Quote |
| News | Tradeshow Schedule | Employment Opportunities | Community Service | Why NewAge? |


Legal Notices & Trademarks | Privacy Policy | Terms & Conditions of Sale 2000 - 2017 NewAge Industries, Inc.

   facebook   linkedin   twitter   google plus

We are your "Fluid Transfer Specialists®"
Contact Us For Experienced Technical Support:
Phone: 800-506-3924 or 215-526-2300
Fax: 800-837-1856 or 215-526-2190
E-mail:
esales@newageindustries.com

NewAge® Industries, Inc., 145 James Way, Southampton, PA 18966-3817