 |
|
|
|
Braid Reinforced Clear PVC Hose |
| |
- Open mesh polyester braiding permanently encapsulated in walls of clear, flexible PVC hose
- Offers far higher pressure capabilities than unreinforced PVC tubing
- Made from non-toxic ingredients conforming to USP Class VI and FDA standards
- Crystal clear compound provides full visual flow^
- Mirror smooth interior permits outstanding flow characteristics
- Corrosion and abrasion resistant with flexibility similar to rubber but with much longer life
|
APPLICATIONS
Beverage Lines • Chemical Transfer •
Coolant Lines • Food Handling • Hydraulics •
Instrumentation Lines • Material Handling • Oil &
Fuel • Pneumatics • Spray Systems • Water &
Fluid Feeds
Physical Properties**
| Hardness, Shore A ±5 |
80 |
| Tensile Strength, psi |
2500 |
| Elongation at Break, % |
320 |
| Brittle Temperature |
-50°F |
| Max. Operating Temperature |
175°F |
**Values listed are typical and are
meant only as a guide to aid in design. Field testing
should be performed to find the actual values for the
application.
Recommended Fittings & Clamps
|
|
Notes
Clear NYLOBRADE is made from non-toxic ingredients selected from those sanctioned by the Food and Drug Administration (FDA) for use in food contact applications.
NYLOBRADE is generally unaffected by
most oxidizing and reducing agents. Diluted acids and
alkalies have little effect, though if highly
concentrated tend to make the hose less pliable. If
chemical resistance is of major question, in-plant tests
are suggested.
Gasoline and oils will harden PVC over
periods of intermittent use. The hardening process will
be greatly reduced under continuous use applications.
^NYLOBRADE HP (High Pressure) sizes 3/8" I.D. and up have a tighter braid pattern and, therefore, reduce the visual flow contact and increase the hose's resistance to bending & flexing. Heavier walls on similar I.D.s will be more resistant to kinking.
Custom sizes, colors, and other
durometers are available through minimum order.
Heat-formed shapes, bonding, and other custom
fabrication, such as a ribbed O.D. for greater
flexibility and abrasion resistance, are also available
-- call for details. Samples of stock material are
available upon request.
NSF-approved NYLOBRADE is available -
contact us for details.
|
TOP OF PAGE
NYLOBRADE
| Product Number |
ID |
OD |
Wall |
Available Lengths |
Working PSI (at 70°F) |
Burst PSI (at 70°F) |
Weight (lbs/100 ft) |
|
1000076 |
.125 (1/8) |
.315 |
.095 |
100, 500 |
465 |
1395 |
3.53 |
|
1000230 |
.188 (3/16) |
.394 |
.103 |
50, 100, 500 |
315 |
945 |
5.06 |
|
1000307 |
.250 (1/4) |
.453 |
.102 |
50, 100, 500 |
300 |
900 |
6.03 |
|
1000461 |
.313 (5/16) |
.531 (17/32) |
.094 |
50, 100, 500 |
280 |
840 |
7.77 |
|
1000538 |
.375 (3/8) |
.600 |
.113 |
50, 100, 500 |
230 |
690 |
9.26 |
|
1000692 |
.500 (1/2) |
.728 |
.114 |
50, 100, 200, 500 |
215 |
645 |
11.82 |
|
1000846 |
.625 (5/8) |
.906 (29/32) |
.141 |
50, 100, 200, 300, 500 |
200 |
600 |
18.17 |
|
1000923 |
.750 (3/4) |
1.024 |
.137 |
50, 100, 300, 500 |
150 |
450 |
20.53 |
|
1001154 |
1.000 |
1.299 |
.150 |
50, 100, 300 |
130 |
390 |
29.03 |
|
1001308 |
1.250 (1-1/4) |
1.732 |
.241 |
50, 100 |
110 |
330 |
60.7 |
|
1001385 |
1.500 (1-1/2) |
1.929 |
.215 |
50, 100 |
70 |
210 |
62.12 |
|
1001462 |
2.000 |
2.500 (2-1/2) |
.250 (1/4) |
50, 100 |
50 |
150 |
95.02 |
|
1020005 |
1.000 |
1.375 (1-3/8) |
.188 (3/16) |
50, 100 |
185 |
555 |
29.03 |
|
1020012 |
1.250 (1-1/4) |
1.732 |
.241 |
50, 100 |
150 |
450 |
60.7 |
|
1020019 |
1.500 (1-1/2) |
1.950 |
.225 |
50, 100 |
90 |
270 |
62.12 |
|
1020026 |
2.000 |
2.500 (2-1/2) |
.250 (1/4) |
50, 100 |
133 |
399 |
95.02 |
|
1020061 |
.250 (1/4) |
.500 (1/2) |
.125 (1/8) |
50, 100, 500 |
400 |
1200 |
6.03 |
|
1020075 |
.375 (3/8) |
.625 (5/8) |
.125 (1/8) |
50, 100, 500 |
265 |
795 |
9.26 |
|
1020096 |
.500 (1/2) |
.850 |
.175 |
50, 100, 500 |
258 |
774 |
20 |
|
1020117 |
.750 (3/4) |
1.125 (1-1/8) |
.188 (3/16) |
50, 100, 200, 300 |
233 |
699 |
20.53 |
|
1030309 |
.250 (1/4) |
.435 |
.093 |
100 |
316 |
948 |
5.35 |
|
1030540 |
.375 (3/8) |
.575 |
.100 |
100 |
215 |
645 |
8.02 |
|
1030694 |
.500 (1/2) |
.710 |
.105 |
100 |
191 |
573 |
10.73 |
|
Add length suffix to part number when ordering.
Example: 500 ft. of 1/8" I.D. x .315" O.D. is part
number 100 0076-500.
ID is the critical dimension for fittings application.
|
|
TOP OF PAGE
BACK TO TUBING & HOSE PAGE
|
Download a printable PDF version of our Nylobrade PVC hose literature.
