• Silicone elastomer meets USP Class VI requirements
• Manufactured under strict Good Manufacturing Procedures in a controlled environment
• Platinum cured for the highest degree of purity (least extractables)
• Reusable -- will withstand repeated sterilization^
• Nonreactive to body tissues and fluids

Click on the part numbers in the chart below for individual product specifications.

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.

• Thermobarb® - Plastic Multi-Barbed Fittings
• Thermobarb® - FDA PP Barbed Fittings
• Thermobarb® - Brass Barbed Fittings
• Molded Silicone Tubing & Hose Assemblies
• Oetiker® ear type clamps
• Kwik Clamp(TM) nylon double bond hose clamps
• Stainless steel worm gear clamps (lined only)

SILCON MED-X tubing is made under strict accordance with Good Manufacturing Procedures and conforms to the biocompatibility requirements of USP Class VI.

SILCON MED-X’s surface properties resist sticking and encrustation, and it will not support bacteria growth. The tubing is soft, pliable, and contains no plasticizers which could leach out, causing flow contamination or tube hardening. Other sizes and 50A durometer material are also available. Call for details.

Note: SILCON MED-X is not recommended for implantable or in-body uses or for continuous steam applications.

Care is recommended in the selection and application of fittings and clamps as sharp barbed fittings or unlined metal clamps could tear into the wall.

^If exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.

SILCON MED-X is supplied in individual, heat-sealed polybags and should be sterilized prior to use.

Sold by standard coil length only. Add length suffix to part number when ordering.
Example: 50 ft. of .012" I.D. x .025" O.D. tubing is part number 283 0072-50.
ID is the critical dimension for fittings application.