Please fill out this form to access your download

Top 20 Tubing and Hose Buying Tips, Part One

Name(Required)
Privacy Agreement(Required)
Email Subscriber
Polyurethane

Superthane®
Polyurethane Tubing

Superthane® Polyurethane Tubing

REQUEST A QUOTE

Features

  • Available in Ester or Ether formulations
  • Both formulations made from non-toxic raw materials conforming to FDA standards for use with wet and fatty food contact surfaces
  • Extremely resistant to weathering†, tearing, impact, radiation, and abrasion
  • Transparent, flexible, resilient, tough; resistant to oils, greases, and fuels††
  • Wide range of temperature resistance: -85°F to 185°F (ester)
  • Ether-based resin is listed by the National Sanitation Foundation (NSF-61) for use with potable water
  • Ester-based raw material is free of animal derived components and REACH compliant
  • Free of DEHP, phthalates, BPA and conflict minerals
  • RoHS compliant
  • Can be heat sealed, coiled, fabricated, or bonded

Applications

 

Cable Jacketing Computer Disc Drives Control Instrumentation Granular Transfer Lines Grease Lines Insulating Sleeves Metering Pumps Nuclear Power Facilities Oxygen & Other Gas Lines Pressure Measuring Devices Robotics Slurry Transfer Small Motor Fuel Lines†† Transfer Lines for Clean Liquids Transfer Lines for Internal Contamination Fluids Vacuum Equipment Washers & Bumpers

Physical Properties**

Hardness, Shore A ±5

Tensile Strength, psi

Elongation at Break, %

Brittle Temperature, °F

Max. Operating Temperature, °F

85

6100

490

-85

185

85

7500

500

-85

175

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.

Notes

†Hydrolytic Stability — For resistance to moisture and fungi, SUPERTHANE ether is recommended. (Ester polyurethane does not react well with water, prolonged humid conditions, or attack from fungi.) The resin used in its manufacture is listed by the National Sanitation Foundation (NSF 61).

 

SUPERTHANE is much more resistant to pressure and vacuum applications than corresponding sizes of PVC or rubber.

 

††Although polyurethane is commonly used in fuel applications, due to additives in today’s gasoline and petroleum products, field testing should be performed.

Custom coiled polyurethane is available — call for details.

 

For easy identification, SUPERTHANE is imprinted with the trademarked name.

 

Any information presented on this webpage or in related promotional materials is being presented solely for informational purposes and does not create any representation from NewAge to any buyer regarding a product’s fitness for a particular use or that a particular use of the product by a buyer (including incorporation into a medical device) would comply with all applicable laws and regulations. NewAge’s standard terms and conditions (found here) will be the sole and exclusive legal agreement between the parties with regards to any purchased products.

Specifications

Ester

Part NumberNoteID
(in.)
OD
(in.)
Wall
(in.)
Available
Lengths (ft.)
Working PSI
(at 70°F)
OpacityColorsWeight
(lbs./100 ft.)
2000075.063.125.031100135TransparentClear0.48
2000152.125.188.031100, 100072TransparentClear0.79
2000229.125.250.063100, 1500130TransparentClear1.92
2000383.170.250.04050070TransparentClear1.37
2000460.188.250.03110027TransparentClear1.13
2000537[B].188.313.063100, 100074TransparentClear2.55
2000768.250.313.03110033TransparentClear1.42
2000845.250.375.063100, 100067TransparentClear3.19
2000999.250.500.125100131TransparentClear7.66
2001076.313.438.06310065TransparentClear3.83
2001153.313.500.09410075TransparentClear6.24
2001230.313.563.125100118TransparentClear8.93
2001307.375.500.06310059TransparentClear4.47
2001384.375.563.09410084TransparentClear7.16
2001461.375.625.125100100TransparentClear10.22
2001615.438.688.12510080TransparentClear11.48
2001692.500.625.06310036TransparentClear5.75
2001846.500.750.12550, 10060TransparentClear12.77
2002000.625.813.09410054TransparentClear10.98
2002077.625.875.12510060TransparentClear15.33
2002231.7501.000.12550, 10051TransparentClear17.88
2002385.8751.125.12510033TransparentClear20.43
20025391.0001.250.12510040TransparentClear22.99

[B] Limited stock item; lead times and minimums may apply — call for details.
Add length suffix to part number when ordering. Example: 100 ft. of 1/8″ I.D. x 3/16″ O.D. ester tubing is part number 200 0152-100.
Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
Cut coils are available from coils of 100 ft. or less; charges apply — call for details. Coils over 100 ft. are sold by standard coil length only.
Tolerances: ID & OD ±3% but not less than ±.005″.
ID is the critical dimension for fittings application.

Custom Capabilities

Cut Pieces

Size

Color

Hot Bond

Heat Form

Hardness

In-Line Cutting

Custom Layline

All custom products are subject to minimum order quantities and lead times. For other custom options, please contact us.

Specifications

Ether

Product NumberNote ID
(in.)
OD
(in.)
Wall
(in.)
Available
Lengths (ft.)
Working PSI
(at 70°F) 
Opacity Colors Weight
(lbs./100 ft.) 
  2100070.063 .125 .03 100, 500 135 Transparent Clear 0.45 
  2100147.125 .188 .031 100 72 Transparent Clear 0.74 
  2100224.125 .250 .063 100, 1500 130 Transparent Clear 1.77 
  2100455.188 .313 .063 100, 1000 74 Transparent Clear 2.38 
  2100462.188 .438 .125 100 CF Transparent Clear 5.97 
  2100609.250 .313 .031 100 33 Transparent Clear 1.33 
  2100686.250 .375 .063 100, 1000 67 Transparent Clear 2.98 
  2100840.250 .500 .125 100 131 Transparent Clear 7.15 
  2100917.313 .438 .063 100 65 Transparent Clear 3.57 
  2101148.375 .500 .063 100, 500 59 Transparent Clear 4.17 
  2101225.375 .563 .094 100 84 Transparent Clear 6.68 
  2101302.375 .625 .125 100 100 Transparent Clear 9.54 
  2101533.500 .625 .063 50, 100 36 Transparent Clear 5.36 
  2101610.500 .688 .094 100 48 Transparent Clear 8.47 
  2101687.500 .750 .125 50, 100 60 Transparent Clear 11.92 
  2101764.625 .750 .063 100 40 Transparent Clear 6.56 
  2101841.625 .813 .094 100 54 Transparent Clear 10.25 
  2101918.625 .875 .125 100 60 Transparent Clear 14.3 
  2101995.750 .938 .094 100 43 Transparent Clear 12.03 
  2102072.750 1.000 .125 50, 100 51 Transparent Clear 16.69 
  2102226.875 1.125 .125 100 33 Transparent Clear 19.07 
  21023801.000 1.250 .125 50, 100 40 Transparent Clear 21.46 
  21025341.500 1.750 .125 100 31 Transparent Clear 30.99 
  21026882.000 2.250 .125 50 22 Transparent Clear 40.53 

[B] Limited stock item; lead times and minimums may apply — call for details.
Add length suffix to part number when ordering. Example: 100 ft. of 1/8″ I.D. x 3/16″ O.D. ester tubing is part number 200 0152-100.
Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
Cut coils are available from coils of 100 ft. or less; charges apply — call for details. Coils over 100 ft. are sold by standard coil length only.
Tolerances: ID & OD ±3% but not less than ±.005″.
ID is the critical dimension for fittings application.

Custom Capabilities

Cut Pieces

Size

Color

Hot Bond

Heat Form

Hardness

In-Line Cutting

Custom Layline

All custom products are subject to minimum order quantities and lead times. For other custom options, please contact us.

Superthane Tubing

download the brochure